Carro Extended Downrod Buying Guide: Ceiling Height and Fit
By CARRO Smart Ceiling Fan and lighting Outlet-Smafan | Published: 2026-11-03
Category: Koopgidsen
Learn how to size a Carro extended downrod for high or sloped ceilings, which fan models it fits, and the trade-offs of a longer 1.04 inch diameter downrod.
Quick answer
Buy the Carro extended downrod only if you own a compatible Carro fan (Nova, Dulac, Marais, Mabel, Zahar, or Araceli) and your ceiling height or slope leaves the fan too close to the floor with the stock downrod. Choose 18 inches for rooms roughly 10 to 12 feet high and 36 inches for higher or more steeply sloped ceilings, then confirm the 1.04 inch diameter matches your fan's mounting hardware.
Why a longer downrod changes more than fan height
A longer downrod lowers the fan, which improves air circulation in tall rooms, but it also increases the visual weight of the fixture and can bring blades closer to doors, drapes, or furniture. The 1.04 inch diameter is fixed, so the downrod is not adjustable in thickness; if your ceiling slope is steep, you may need a slope adapter rather than a longer pipe alone.
The mounting ball is not included, so plan to reuse the ball from your existing fan or confirm you have one before ordering. This is the most common reason a downrod order gets returned.
When the stock downrod is enough
If your ceiling is 9 feet or lower, the standard downrod that came with your fan usually keeps blades at a safe clearance. Extending the downrod in a standard-height room can make the fan feel low and reduce headroom. Measure from the ceiling to the floor, then subtract the fan's drop (motor housing plus blades) to see whether you actually need extra length.
The trade-off: length versus stability
Longer downrods can introduce more sway in high-airflow settings, especially on sloped ceilings. Carro's 18-inch and 36-inch options are intended for the specified models, but a 36-inch downrod in a room with a very high ceiling may still need a ceiling mount rated for the extra leverage. If you are unsure, choose the shorter length that clears obstructions rather than the longest available.
Decision rules for choosing a Carro extended downrod
- Check your fan model first: Confirm your fan is a Nova, Dulac, Marais, Mabel, Zahar, or Araceli. If it is not on that list, this downrod will not fit, regardless of ceiling height. Model compatibility is the first filter; length comes second.
- Measure ceiling height and slope: Measure floor-to-ceiling height and the ceiling angle. For a flat ceiling around 10 to 12 feet, choose 18 inches; for ceilings above 12 feet or slopes greater than about 15 degrees, choose 36 inches only if the fan's mounting system supports it. Write down both numbers before you shop; slope often decides the length more than height does.
- Confirm the mounting ball: The mounting ball is not included. Reuse the ball from your existing Carro fan, or source one separately before installation day. No mounting ball means no installation; check the box before you schedule help.
- Decide between 18 and 36 inches: Choose 18 inches when you need a modest drop for a tall room or a slight slope. Choose 36 inches only when the ceiling is very high or the slope is steep enough that the shorter rod leaves the fan too close to the ceiling. Shorter is safer for stability; longer is better for airflow in tall rooms.
Product facts
- Carro Extended Downrod for Specified Ceiling Fan | 1.04" Diameter: The downrod has a 1.0433 inch (26.5 mm) diameter and is offered in 18-inch and 36-inch lengths. The fixed diameter means you must match it to your fan's mounting hardware; the two lengths cover most high-ceiling and sloped-ceiling installations.
Carro Extended Downrod for Specified Ceiling Fan | 1.04" Diameter - Carro Extended Downrod for Specified Ceiling Fan | 1.04" Diameter: It fits only Carro specified ceiling fan models such as Nova, Dulac, Marais, Mabel, Zahar, and Araceli, and the mounting ball is not included. Check your fan model before ordering and plan to reuse your existing mounting ball, or the downrod will not install.
Who this downrod is for
Best for
- Owners of compatible Carro fans (Nova, Dulac, Marais, Mabel, Zahar, Araceli) with ceilings higher than 9 feet
- Rooms with sloped ceilings where the stock downrod leaves the fan too close to the ceiling
- Anyone who needs a 1.04 inch diameter downrod in 18 or 36 inches and can reuse an existing mounting ball
Not for
- Fans from other brands or Carro models not listed as compatible
- Standard 8 to 9 foot ceilings where the stock downrod already provides safe clearance
- Installations where no mounting ball is available and cannot be sourced
