How to Replace Striker 56-Inch Fan Blades

By CARRO Smart Ceiling Fan and lighting Outlet-Smafan | Published: 2026-10-25

Category: How-to Guides

Learn the step-by-step process to safely remove and install replacement blades on your Striker 56-inch smart ceiling fan. Includes compatibility tips and common mistakes to avoid.

Quick Answer

To replace Striker 56-inch fan blades, first confirm you have the correct replacement kit from Smafan.com, then safely remove the old blades and install the new ones using the provided hardware. Always turn off power at the breaker before starting.

Why Blade Replacement Matters for Your Striker Fan

Over time, outdoor ceiling fan blades can warp, crack, or become unbalanced due to weather exposure. Replacing them restores airflow performance, reduces wobble, and keeps your fan running quietly. The Striker 56-inch model is damp-rated, so using the correct replacement blades designed for that specific fan is essential for fit and safety.

Compatibility Check: Not All Blades Fit

The Striker 52-inch and 56-inch models use different blade sets. The 56-inch blades are longer and have a specific mounting pattern. Only purchase replacement blades listed for the Striker 56-inch fan from Smafan.com to ensure proper fit. Blades from other sellers or platforms may look similar but are not guaranteed to be compatible.

Step-by-Step Blade Replacement Process

Turn Off Power and Prepare Tools: Switch off the fan at the wall switch and flip the breaker to the fan circuit. Gather a screwdriver (Phillips head), a soft cloth, and your new blade kit. Place the cloth on the floor below the fan to catch dropped screws. Never rely on the remote alone to cut power — always use the breaker.
Remove the Old Blades: Locate the screws attaching each blade to the fan motor housing (usually 2-3 screws per blade). Support the blade with one hand while unscrewing to prevent it from falling. Set the old blades and screws aside. Keep the original screws — the new kit may use different ones; compare before discarding.
Inspect the Motor Mounting Points: Wipe the mounting brackets on the motor housing with a dry cloth to remove dust or debris. Check for any bent brackets or stripped screw holes. If damaged, contact Smafan support before installing new blades. A bent bracket will cause the new blade to wobble — fix it now rather than later.
Install the New Blades: Align the first new blade with the mounting bracket. Insert the screws and tighten them evenly by hand, then give each a final snug turn with the screwdriver. Repeat for all blades. Do not overtighten — this can strip the plastic or crack the blade. Tighten screws in a star pattern if a blade has more than two screws to distribute pressure evenly.
Restore Power and Test: Turn the breaker back on and use the remote or wall switch to run the fan at low speed. Listen for unusual noise and watch for wobble. If the fan shakes, turn it off and recheck that all screws are snug and blades are evenly spaced. A slight wobble after replacement usually means one screw is loose or a blade is not seated flat.

Product Facts

Striker Smart Ceiling Fan with LED Light and Remote Outdoor/Indoor 56 inch: Damp-rated ceiling fans are perfect for covered patios, screened porches, and similar spaces shielded from direct rain, snow, or moisture. This means the Striker 56-inch fan is designed for outdoor use under cover, and its blades are built to withstand humidity and occasional moisture without degrading quickly.
Striker Smart Ceiling Fan with LED Light and Remote Outdoor/Indoor 56 inch